Chevy LT-Series Small-Block V-8 LT1 6.2L with wet sump; Direct injection spark ignition - 19431953

|
19431953
$9,656.54 $0.00( / )

Fifth Generation Chevrolet Performance


The LT1 6.2L opened the next chapter in the historic legacy of the Small-Block engine—and it gives your project vehicle a high-tech heart transplant with a balance of performance and efficiency. Our crate engine is rated at 460 horsepower and 465 lb.-ft. of torque.


The LT1 is architecturally similar to the LS family of Small-Block engines, but with a unique block casting, cylinder head design, oiling system and more. It also combines advanced  technologies, including direct injection and continuously variable valve timing. See page 124 for the recommended controller.


INSTALLATION NOTES


  • Engines shipped with high-pressure direct-injection fuel pump installed
  • Assembly does not include any electronics
  • Select the right controller kit for your LT1 Engine.
  • Not intended for marine applications
  • Front-End Accessory Drive system must be ordered separately.
  • Use P/N 19417547 Front-End Accessory Drive system without air conditioning and P/N 19369182 A/C add-on kit
  • Can accomodate P/N 19420208 Hydraulic Power Steering Kit (not included with
  • Accessory Drive System)
  • Includes 8-bolt flexplate
  • Chevrolet Performance control kits do not use the Active Fuel Management components on this crate engine

Technical Specifications


Part Numbers: 19431953
Engine Type: Direct injection spark ignition Gen V Small-Block V-8
Displacement (cu in ): 376 (6.2L)
Bore x Stroke (in ): 4.065 x 3.622 (103.25 x 92mm)
Block (P/N 12619171 ): Cast aluminum with 6-bolt nodular iron main bearing caps
Crankshaft: Forged steel
Connecting Rods: Forged powdered metal
Pistons: Hypereutectic aluminum
Camshaft Type (P/N 12629512 ): Billet steel roller
Valve Lift (in ): 0.561 intake / 0.531 exhaust
Camshaft Duration (@0.050 in ): 242° intake / 244° exhaust
Cylinder Heads (P/N 12699617 ): Aluminum, rectangular port D/I
Valve Size (in ): 2.130 intake / 1.590 exhaust
Compression Ratio: 11.5:1
Rocker Arms (P/N 12619829 ): Investment-cast, roller bearing trunnion
Rocker Arm Ratio: 1.81:1
Recommended Fuel: Premium pump
Maximum Recommended rpm: 6,600
Reluctor Wheel: 58x
Balanced: Internal
Add to Wishlist
Categories:

Fifth Generation Chevrolet Performance


The LT1 6.2L opened the next chapter in the historic legacy of the Small-Block engine—and it gives your project vehicle a high-tech heart transplant with a balance of performance and efficiency. Our crate engine is rated at 460 horsepower and 465 lb.-ft. of torque.


The LT1 is architecturally similar to the LS family of Small-Block engines, but with a unique block casting, cylinder head design, oiling system and more. It also combines advanced  technologies, including direct injection and continuously variable valve timing. See page 124 for the recommended controller.


INSTALLATION NOTES


  • Engines shipped with high-pressure direct-injection fuel pump installed
  • Assembly does not include any electronics
  • Select the right controller kit for your LT1 Engine.
  • Not intended for marine applications
  • Front-End Accessory Drive system must be ordered separately.
  • Use P/N 19417547 Front-End Accessory Drive system without air conditioning and P/N 19369182 A/C add-on kit
  • Can accomodate P/N 19420208 Hydraulic Power Steering Kit (not included with
  • Accessory Drive System)
  • Includes 8-bolt flexplate
  • Chevrolet Performance control kits do not use the Active Fuel Management components on this crate engine

Technical Specifications


Part Numbers: 19431953
Engine Type: Direct injection spark ignition Gen V Small-Block V-8
Displacement (cu in ): 376 (6.2L)
Bore x Stroke (in ): 4.065 x 3.622 (103.25 x 92mm)
Block (P/N 12619171 ): Cast aluminum with 6-bolt nodular iron main bearing caps
Crankshaft: Forged steel
Connecting Rods: Forged powdered metal
Pistons: Hypereutectic aluminum
Camshaft Type (P/N 12629512 ): Billet steel roller
Valve Lift (in ): 0.561 intake / 0.531 exhaust
Camshaft Duration (@0.050 in ): 242° intake / 244° exhaust
Cylinder Heads (P/N 12699617 ): Aluminum, rectangular port D/I
Valve Size (in ): 2.130 intake / 1.590 exhaust
Compression Ratio: 11.5:1
Rocker Arms (P/N 12619829 ): Investment-cast, roller bearing trunnion
Rocker Arm Ratio: 1.81:1
Recommended Fuel: Premium pump
Maximum Recommended rpm: 6,600
Reluctor Wheel: 58x
Balanced: Internal
Type: 

Engine Complete Assembly

Vendor: 

Chevrolet Performance Parts

SKU: 

19431953

Weight: 

430.0 lb

California Residents: Prop 65 Warning